The Effect of Phase on Paper Thickness Optimization in the Recycling Process Using Recycling Machine

Fauzhia Novitri Rahmasari

Abstract


Efforts to manage the recycling of paper waste into new paper have been carried out in recent times. It takes a tool or machine that is able to effectively and efficiently recycle used paper into new paper. There are several factors that affect the effectiveness of paper recycling machines, one of which is the paper thickness. One method that can be used to analyze the factors that influence paper thickness in the paper production process using a paper recycling machine is regression analysis. Regression analysis is data analysis techniques in statistics that is used to examine the relationship between several independent variables and dependent variable. However, if we want to examine the relationship or effect of two or more independent variables on a dependent variable, the regression model used is a multiple linear regression model. This study purposes are to analyze the factors that influence paper thickness using a paper recycling machine using multiple linear regression and to inform the modeling about that. The results showed that the factors that affect the paper thickness optimization are destruction and press phase.


Keywords


Multiple Linear Regression Analysis; Paper Making Phase; Paper Recycling Machine; Paper Thickness

Full Text:

PDF

References


Asmatulu, R., & Asmatulu, E. (2011). Importance of recycling education: a curriculum development at WSU. Journal of Material Cycles and Waste Management, 13(2), 131.

Djami, R. (2014). Metode PCR-TOPSIS untuk Optimasi Taguchi Multirespon. Institut Teknologi Sepuluh Nopember.

Effendi, E., Mursilah, M., & Mujiono, M. (2018). Korelasi Tingkat Perhatian Orang Tua dan Kemandirian Belajar dengan Prestasi Belajar Siswa. Titian Ilmu: Jurnal Ilmiah Multi Sciences, 10(1), 17–23. https://doi.org/10.30599/jti.v10i1.131

Faraz, A., Biermann, D., & Weinert, K. (2009). Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates. International Journal of Machine Tools and Manufacture, 49(15), 1185–1196.

Goddard, J., Tavakoli, M., & Wilson, J. O. S. (2005). Determinants of profitability in European manufacturing and services: evidence from a dynamic panel model. Applied Financial Economics, 15(18), 1269–

Hongxun, C., Weiwei, L., Wen, J., Peiru, W., & Bing, Z. (2011). Development of low specific-speed centrifugal pump impellers based on flow control technique. Chinese Journal of Drainage and Irrigation Machinery Engineering, 6(9), 466–470.

Irianto, A. (2004). Statistik konsep dasar dan aplikasinya. Jakarta: Kencana.

Johnson, R. A., & Bhattacharyya, G. . (2010). Statistics, Principles and Methods (6th ed.). New York: John Wiley & Sons, Inc.

Kusuma, T. W. N., & Puspita, D. (2016). Aplikasi Komputer dan Pengolahan Data: Pengantar Statistik Industri. Malang: UB Press.

Kutner, M. H., Nachtsheim, C. J., Neter, J., & Li,

W. (2005). Applied linear statistical models (4th ed.). New York: McGraw-Hill Irwin New York.

Montgomery, D. C., Peck, E. A., & Vining, G. G. (2012). Introduction to linear regression analysis (5th ed.). New York: John Wiley & Sons.

Rahmasari, F. (2017). Optimasi Multirespon Metode Taguchi Menggunakan PCA-TOPSIS dan Metode Vikor. Institut Pertanian Bogor.

SATHEESH, M., & EDWIN RAJA DHAS, J. (2013). MULTI OBJECTIVE OPTIMIZATION OF FLUX CORED ARC WELD PARAMETERS USING FUZZY BASED DESIRABILITY FUNCTION. IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION B- ENGINEERING,

http://ejournal.iainbengkulu.ac.id/index.php/ijisedu

(M2 (MECHANICAL ENGINEERING)), 175–187.

Soejanto, I. (2009). Desain eksperimen dengan metode taguchi. Yogyakarta: Graha Ilmu.

Tan, X., & Engeda, A. (2016). Performance of centrifugal pumps running in reverse as turbine : Part Ⅱ - systematic speci fi c speed and speci fi c diameter based performance prediction. Renewable Energy, 99, 188–197.

Widiyawati, W., & Setiawan, S. (2015). Analisis Faktor-Faktor yang Mempengaruhi Tingkat Produksi Padi dan Jagung di Kabupaten Lamongan. Jurnal Sains Dan Seni ITS, 4(1), D103–D108.

Yafie, E., Kustiawan, U., & Seken, I. M. (2018). Pelatihan Pembuatan Benda Cinderamata dari Bahan Kertas Daur Ulang untuk Kegiatan Kewirausahaan Mahasiswa dan Guru Alumni. Abdimas Pedagogi: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 1(2), 122–127.

Zahra, F., & Damanhuri, T. P. (2011). Kajian Komposisi, Karakteristik, dan Potensi Daur Ulang Sampah di TPA Cipayung, Depok. Jurnal Teknik Lingkungan, 17(1), 59–69.

https://doi.org/http://dx.doi.org/10.561 4%2Fjtl.2011.17.1.6




DOI: http://dx.doi.org/10.29300/ijisedu.v2i1.2486

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 IJIS Edu : Indonesian Journal of Integrated Science Education

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

IJIS Edu: Indonesian Journal of Integrated Science Education
ijis.edu@mail.uinfasbengkulu.ac.id

 

Lantai 2 Fakultas Tarbiyah dan Tadris
Universitas Islam Negeri Fatmawati Sukarno Bengkulu
Jl. Raden Fatah Kel. Pagar Dewa Kec. Selebar Kota Bengkulu

 

  Creative Commons License
IJIS Edu : Indonesian Journal of Integrated Science Education This is published by UIN Fatmawati Sukarno Bengkulu and distributed with the permission below Creative Commons Attribution-ShareAlike 4.0 International License.